Spokane County Code gives every kitchen two clocks: hydromechanical (under-sink) traps every 30 days or at 25%, gravity interceptors every 90 days or at 25% of the last chamber, whichever comes first (8.03.5080.B.1–2). A quiet kitchen pays the calendar; a busy one pays the fill line. The table estimates which clock binds each kitchen type and what a year costs at the ranges on our cost page.
City of Spokane kitchens run under SMC 13.03A, which we do not quote on this site; we service city kitchens on the county clock as the conservative default.
Estimated annual cost by kitchen type
| Kitchen | Assumed | Device | Est. interval | Services / yr | Per service* | Per year* |
|---|---|---|---|---|---|---|
| Coffee shop or bakery | 150 meals/day, 0.7× load, 6 days/wk | 50-gal under-sink trap (50 gal) | ~23 days | 16 | $125–$225 | $2,000–$3,600 |
| Pizza, sandwich or taco shop | 250 meals/day, 1× load, 7 days/wk | 500-gal interceptor (500 gal) | ~85 days | 5 | $300–$650 | $1,500–$3,250 |
| Full-service restaurant | 300 meals/day, 1× load, 7 days/wk | 1,000-gal interceptor (1,000 gal) | ~90 days (calendar cap) | 5 | $300–$650 | $1,500–$3,250 |
| Fryer-heavy quick service, wings, BBQ | 400 meals/day, 1.5× load, 7 days/wk | 1,000-gal interceptor (1,000 gal) | ~70 days | 6 | $300–$650 | $1,800–$3,900 |
| Institution: school, hospital, 24-hour kitchen | 1200 meals/day, 1× load, 7 days/wk | 3,000-gal interceptor (3,000 gal) | ~90 days (calendar cap) | 5 | $850–$1,500 | $4,250–$7,500 |
*Per-service figures are the ranges already on this site’s cost page (nobody in this market publishes a grease price, us included; see that page for where the ranges come from). Intervals come from the same accumulation model as the calculator: about 0.035 lb of grease and solids per meal, scaled by menu, 7.4 lb per gallon, pumped when the device reaches 20% of capacity so it never operates over the 25% line. Spokane County caps interceptors at 90 days and under-sink traps at 30 days regardless of fill (8.03.5080.B); where the model says longer, the cap is shown instead. Annual = services per year × per-service range. The first pump-out reading replaces every estimate on this page.
Reading the rows
- Coffee shop or bakery on a 50-gallon trap. Even at light load, fifty gallons is little headroom: the model lands at about three weeks, inside the county’s 30-day trap rule. This is the row where a larger device would actually cut the annual bill.
- Pizza, sandwich, taco on a 500. Moderate volume; the 25% line usually arrives before the 90-day cap does.
- Full-service restaurant on a 1,000. The bigger tank helps: the model says four to five months to the planning line, so the county’s 90-day cap binds first. A busier week than assumed moves you to the fill line.
- Fryer-heavy. The calculator’s own 1.5× “heavy” setting. The 90-day cap is irrelevant here; the 25% rule does all the work, and a director can shorten the interval further (8.03.5080.E works both ways).
- Institutions. A 3,000-gallon tank behind a 1,200-meal day reaches the planning line in about three and a half months, so the 90-day cap binds. The size buys retention time for the sewer, not a longer pumping interval for you.
What is not in the table
Emergency call-outs, jetting after a backup, overflow liability under 8.03A.0213, and county enforcement and cost recovery. A kitchen that keeps the schedule above never sees those lines.
How to turn an estimate into your number
Run the calculator with your real device size and meal count, then book the first service. The depth reading that day replaces the model; the second visit is scheduled from the reading. If the reading shows you stay under 25% for the full 90 days, that record is the evidence for a director’s exception.
Your tank, your number
Tank size and meals per day. We quote flat, and the first reading sets the real interval.
Call (509) 352-0550