The usual story
The brewery was built as a brewery: floor drains, a trench, maybe a small interceptor sized for wash-down. Then a kitchen went in, or a food truck started parking on the patio and rinsing in the back. Now the device is handling fryer grease it was never sized for, and spent-grain fines are settling in the bottom compartment where nobody looks.
Three things specific to a brewery
- Spent grain is solids. The county’s 25% rule counts grease and solids against the last chamber (B.2). Grain fines that reach the interceptor fill it from the bottom, and a tank can be at 25% with almost no visible cap.
- Hot caustic rinse water is not a cleaning method. A device must be pumped dry with the baffles washed (B.5). Flushing hot water through it moves grease downstream; emulsifiers and surfactants are not permitted as maintenance (B.6).
- Hosted trucks discharge into your device. If a truck dumps grey water on your lot, it is your interceptor, your 90-day clock and your three-year record. Put the rule in the vendor agreement.
Right-sizing
Washington sizes devices under the 2021 Uniform Plumbing Code. A taproom that moves from snacks to a fryer line is a change in load the original sizing never saw. We will tell you honestly whether the existing device can hold a 90-day interval or whether it is a 30-day device now; the percent-full reading at the first pump-out answers it.
What every visit leaves
A record with date and time, gallons removed, the hauler, the percent-full reading, and a note on baffles and the sample box. Kept on site three years (C), it is also the evidence for a longer interval under the director’s exception (E) if your real load turns out to be light.
Taproom with a kitchen?
Tell us the device and the menu. Scheduled around brew days.
Call (509) 352-0550